Versions Compared

Old Version 4

changes.mady.by.user Dirk Rutschmann

Saved on

compared with

New Version Current

changes.mady.by.user Patrick Schmider

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Info
titleWARNING

  • This change/setup is not supported for standard customer- or shop-environments!

  • Only

...

  • experts should reconfigure the mover for special setups

  • After the Mover is changed / reconfigured - it will inevitably lose its default configuration
    this means it will no longer be usable at other locations with the default lightbeam components!


Network Setup


The scanner must be in the same local network as the computer with the shooIQ pro software. Therefore we provide a preconfigured Hotspot with the SSID lightbeam_hotspot with the scanner. The mover (robot) of the scanner is also preconfigured onto this SSID. Therefore you must only connect the hotspot to the internet via cable with the WAN port of the device and your computer by ethernet cable to the LAN port of the hotspot (or by WiFi with the lightbeam_hotspot).

...

Connect a device to the configuration WiFi of the scanner
BrowserConfiguration

Test the configuration

The scanner has a second wifi network for configuration purposes only.

It shows up with the SSID lightbeam_444444 where the number is
the serial of the scanner. Please click on this WiFi network.

The password of the configuration network is

wireless

When you are connected to the configuration WiFi, please start a browser and direct it to

http://lightbeam.config

alternativ unter IP 192.168.99.1

The scanner configuration page shows up.
Here you can set the WiFi network with which
the scanner should be connected.

With the dropdown box please select the WiFi
network to connect the scanner to.


The default WiFi is

lightbeam_hotspot

Enter the password of the WiFi and press Submit

The password of the default WiFi lightbeam_hostpot is

pEr16fect2fiT		Please wait until the connection is established.

If the connection fails, please make sure, that
you have entered the right password of your WiFi. In some cases, also a restart of the scanners Mover helps.

...